Removal And Installation

FRONT STABILIZER


Removal and Installation


REMOVAL
1. Remove tires with power tool. Removal And Installation.
2. Remove engine under cover with power tool. Service and Repair.
3. Remove stabilizer connecting rod.

CAUTION:
Apply a matching mark to identify the installation position.
4. Remove stabilizer clamp and stabilizer bushing.
5. Remove stabilizer bar.
6. Perform inspection after removal. Testing and Inspection.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Check the matching mark when installing.
- Tighten the mounting nut to the specified torque while holding a hexagonal part of stabilizer connecting rod side.