Removal And Installation Base Audio Without Navigation

AV CONTROL UNIT


Removal and Installation


REMOVAL

CAUTION:
Before replacing AV control unit, perform "READ CONFIGURATION" to save or print current vehicle specification. For details, Base Audio Without Navigation.
1. Remove the preset switch. Removal And Installation Base Audio Without Navigation.
2. After removing the AV control unit mounting screws to disconnect the connectors, remove the AV control unit with the bracket attached.
3. Remove the bracket screws to remove the bracket from the AV control unit.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Be sure to perform "WRITE CONFIGURATION" when replacing AV control unit. For details, refer to AV77, "Work Procedure".