Information Display

INFORMATION DISPLAY





Component Function Check
1.CHECK FUNCTION
1. Select "INTELLIGENT KEY" of "BCM" using CONSULT-III.
2. Select "LCD" in "ACTIVE TEST" mode.
3. Check each warning display on meter display.
Is the inspection result normal?
YES - Information display is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK COMBINATION METER
Reading and Clearing Diagnostic Trouble Codes.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace the malfunctioning parts.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END