Removal And Installation

HEATER & COOLING UNIT ASSEMBLY


HEATER CORE : Removal and Installation


REMOVAL
1. Remove heater & cooling unit assembly. .
2. Remove heater pipe grommet.
3. Remove mounting screw, and then remove heater pipe bracket.
4. Remove foot duct LH. Foot Duct.
5. Slide heater core to left side.

INSTALLATION
Note the following items, and install in the reverse order of removal.

NOTE:
Refilling (VQ37VHR models) or Refilling (VK56VD models) when filling radiator with engine coolant.