Door Control

AUTOMATIC AIR CONDITIONING SYSTEM (WITH FOREST AIR) : Door Control


DOOR MOTOR CONTROL
- The A/C auto amp. receives data from each sensor.
- When control signal from A/C auto amp. is received, each door motor of intake, air mix (driver side and passenger side), mode (driver side and passenger side), upper ventilator (driver side and passenger side) and rear mode operates door to the optimum position based on PBR (Potential Balance Resistor) door position detection signal.

SWITCHES AND THEIR CONTROL FUNCTIONS

NOTE:
For LH/RH independent temperature and air outlet adjustment function, construction indicated by broken line as shown in the figure is divided to driver side and passenger side by divider plate.















*: Inlet status is displayed by indicator when activating automatic control.

AIR DISTRIBUTION





- *1: Air blow is also supplied to front foot until passenger room temperature stabilizes when temperature setting is other than 18�C (60�F). At that time, air blowing is the same as 18�C (60�F) setting.
- *2: During automatic defogging control. Automatic Defogging Control.