Rear Seat

REAR SEAT


Disassembly and Assembly


SEATBACK
1. Remove mounting bolts, and then remove seat belt guide LH and RH.
2. Remove mounting bolts. Remove seatback bracket (LH), seatback bracket (RH) and center seatback bracket.





3. Remove the headrest holder.

CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
4. Remove hog rings and remove seatback trim from seatback pad.
Assemble in the reverse order of disassembly.

CAUTION:
Install the hog rings of seat trim in position, and then securely connect the trim or trim cord with the pad side wire.

SEAT CUSHION
Remove hog rings and remove seat cushion trim from seat cushion pad.
Assemble in the reverse order of disassembly.

CAUTION:
Install the hog rings of seat trim in position, and then securely connect the trim or trim cord with the pad side wire.

ARMREST
1. Remove mounting screws. Remove center armrest lid.





2. Slide center armrest tray & box. Disengage pawls. Remove center armrest tray & box.

Triangle: Pawl

3. Remove center armrest hinge escutcheon.
4. Remove mounting bolts. Remove center armrest hinge.
Assemble in the reverse order of disassembly.