Removal and Installation

TRUNK LID


TRUNK LID ASSEMBLY : Removal and Installation


CAUTION:
Operate with two workers, because of its heavy weight.

REMOVAL
1. Remove the trunk lid finisher inner. Removal And Installation





2. Disconnect harness connector (A) and harness clip (B) in trunk room.





3. Remove grommet (1), and then pull harness throughout body panel (2).
4. Remove the trunk lid hinge mounting bolts on trunk lid side and remove the trunk lid assembly.

INSTALLATION
Note the following item, and install in the reverse order of removal.

CAUTION:
- After installing, apply touch-up paint (the body color) onto the head of the hinge mounting bolts.
- Check trunk lid open/close, lock/unlock operation after installation.
- After installation, perform fitting adjustment. Adjustments.