BSW & BSI

PRE-INSPECTION FOR DIAGNOSIS


Inspection Procedure

1.PERFORM PRE-INSPECTION OF LANE CAMERA UNIT
Perform pre-inspection of lane camera unit. LDW & LDP.
- GO TO 2.
2.CHECK REAR BUMPER NEAR THE SIDE RADAR
Are rear bumper near the side radar contaminated with foreign materials?
YES - Clean the rear bumper.
NO - GO TO 3.
3.CHECK SIDE RADAR AND THE SIDE RADAR OUTSKIRTS
Are side radar and the side radar outskirts contaminated with foreign materials?
YES - Clean the side radar or side radar outskirts.
NO - GO TO 4.
4.CHECK SIDE RADAR INSTALLATION CONDITION
Check side radar installation condition (installation position, properly tightened, a bent bracket).
Is it properly installed?
YES - INSPECTION END
NO - Install side radar properly.