Side Radar

SIDE RADAR


Removal and Installation


EXPLODED VIEW











REMOVAL AND INSTALLATION

Removal
1. Remove the rear bumper fascia.
2. Remove the side radar connector.





3. Remove the mounting nut.
4. Remove the side radar RH/LH.

Installation
Note the following, and install in the reverse order of removal.





- Tighten mounting nuts in the numerical order as shown in the figure.
- Always lock the side radar connector.

NOTE:
- After replacing the side radar, activate (normal usage mode) it in work support mode. Description.
- The activation is not required depending on service part.