P0607

P0607 ECM





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC.
Is DTC detected?
YES - Go to SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.INSPECTION START
1. Turn ignition switch ON.
2. Erase DTC.
3. Perform DTC Confirmation Procedure.
See SEE DTC Logic.
4. Check DTC.
Is the DTC P0607 displayed again?
YES - GO TO 2.
NO - INSPECTION END
2.REPLACE ECM
1. Replace ECM.
2. Go to Work Procedure.
- INSPECTION END