B210B

B210B STARTER CONTROL RELAY





Description
Starter control relay, integrated in IPDM E/R, permits the starter motor operation when selector lever is in the N or P position (A/T models) or clutch pedal is depressed (M/T models), and the steering is locked or unlocked
(models with steering lock unit).




DTC Logic

DTC DETECTION LOGIC

NOTE:
If DTC B210B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Security System.






DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn the power supply position to start under the following conditions and wait 1 second or more.

A/T models
- Selector lever is in the P or N position
- Do not depress brake pedal

M/T models
- Do not depress clutch pedal
2. Check "Self-diagnostic result" using CONSULT-III.
Is DTC detected?
YES - Go to SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.INSPECTION START
1. Turn ignition switch ON.
2. Check "Self-diagnostic result" for IPDM E/R using CONSULT-III.
3. Touch "ERASE".
4. Perform DTC Confirmation Procedure.
See SEE DTC Logic.
Is the DTC B210B displayed again?
YES - Replace IPDM E/R. Refer Removal And Installation.
NO - INSPECTION END