Removal and Installation

TRUNK LID


TRUNK LID ASSEMBLY : Removal and Installation


REMOVAL





1. Open trunk lid from coupe state by roof open operation and stop the operation when trunk lid is open to rear of the vehicle.
2. Unlock trunk lid hinge lock (1) and lift trunk lid in upward direction.










3. Place a supporting block against the trunk lid lock.

WARNING:
Body injury may occur if no supporting rod is holding the trunk lid open when removing the stay.

CAUTION:
While removing use a shop cloth or tape to protect from damaging.
4. Remove trunk lid finisher. Removal And Installation.
5. Disconnect harness connector and harness clamp.
6. Remove mounting bolts, and then remove trunk lid assembly.
7. Remove shim. (trunk lid side)

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- After installing, check operation.
- After installing, perform fitting adjustment. Trunk Lid Assembly.