Rear

BRAKE PIPING


REAR : Inspection


INSPECTION AFTER INSTALLATION
1. Check the brake hoses and tubes for the following: no scratches; no twist and deformation; no interference with other components when steering the steering wheel; no looseness at connections.
2. Depress the brake pedal and hold down the pedal for approximately 5 seconds with the engine running.
Check for any fluid leakage.

Standard
The force applied to the brake pedal : 785 N (80 kg, 176 lb)

CAUTION:
Retighten the applicable connection to the specified torque and repair any abnormal (damaged, worn or deformed) part if any brake fluid leakage is present.