Rear Stabilizer

STABILIZER BAR


Removal and Installation


REMOVAL
1. Remove mounting bracket of center muffler and remove mounting rubber of main muffler. Refer to Testing and Inspection Component.
2. Remove lower side mounting nut on stabilizer connecting rod and remove stabilizer connecting rod from stabilizer bar with power tool.
3. Remove mounting nut on stabilizer clamp and remove stabilizer from vehicle with power tool.

INSPECTION AFTER REMOVAL
Check stabilizer bar, stabilizer bushings, stabilizer clamp, stabilizer connecting rod and stabilizer connecting rod mounting bracket for any deformation, crack or damage. Replace if there are.

INSTALLATION
Installation is the reverse order of removal. For tightening torque. Refer to Component.

CAUTION:
Do not reuse non-reusable parts.