Diagnosis Chart By Symptom 1

TROUBLE DIAGNOSIS


Diagnosis Chart by Symptom 1

1.CHECK SELF-DIAGNOSTIC RESULTS

Perform RAS self-diagnosis.
- With CONSULT-III: Consult-III Function (RAS/HICAS).
- Without CONSULT-III: Diagnosis Procedure With Self-Diagnosis Function (Without Consult-III).
Are malfunctioning items displayed in self-diagnosis results?
YES - Repair or replace any malfunctioning items.
NO - GO TO 2.
2.CHECK RAS STATIC/DYNAMIC CHARACTERISTICS
Check RAS static/dynamic characteristics. Refer to Check RAS Static/Dynamic Characteristics.
Is the malfunction corrected?
YES - INSPECTION END
NO - Perform the following check, and then check the symptom again.
- Adjust neutral position of steering angle sensor. Refer to Testing and Inspection.
- Steering angle sensor mounting condition. Refer to VDC/TCS/ABS.