Windshield Washer Spray Nozzle: Testing and Inspection

FRONT WASHER NOZZLE AND TUBE


Inspection and Adjustment


INSPECTION

Washer Nozzle Inspection
Check that air can pass through the hose by blowing forward (toward the nozzle), and check that air cannot pass through by sucking.






ADJUSTMENT

Washer Nozzle Spray Position Adjustment
Adjust spray positions to match the positions shown in the figure.















Insert a needle or similar object (A) into the spray opening (1) and move up/down and left/right to adjust the spray position.

NOTE:
If wax or dust gets into the nozzle, remove wax or dust with a needle or small pin.