Removal and Installation

REAR SEAT BELT


SEAT BELT RETRACTOR : Removal and Installation


REMOVAL
1. Remove rear seat cushion. Refer to Removal and Installation.
2. Remove outer anchor mounting bolt.
3. Remove seatback. Refer to Removal and Installation.
4. Remove rear side trim. Refer to Exploded View.





5. Remove seat belt hook mounting screws (A) and pawls, and then remove seat belt hook.
6. Remove shoulder anchor bolts.
7. Remove seat belt retractor mounting bolts, and then remove seat belt retractor.

INSTALLATION
Install in the reverse order of removal.