Floor Trim

FLOOR TRIM


Removal and Installation


REMOVAL
1. Remove front seat assembly (LH/RH). Refer to Removal and Installation.
2. Remove rear seat cushion. Refer to Removal and Installation.
3. Remove accelerator pedal pad. Refer to Removal and Installation.





4. Disengage clip of floor hook (1) with remover tool (A).

5. Remove foot grille. Refer to Foot Grille.
6. Remove front seat belt floor anchor bolt (LH/RH). Refer to Exploded View.
7. Remove center console assembly. Refer to Removal and Installation.
8. Remove front kicking plate inner (LH/RH), dash side finisher (LH/RH), and body side welt (LH/RH). Refer to Body Side Trim.
9. Remove instrument passenger lower cover and instrument side panel (LH/RH). Refer to Removal and Installation.
10. Remove YAW RATE/G-SENSOR. Refer to Removal and Installation.
11. Remove diagnosis sensor unit. Refer to Removal and Installation.
12. Remove console rear bracket. Refer to Removal and Installation.
13. Remove floor harness mounting clamps.
14. Remove floor trim mounting clips and fixing nuts.
15. Remove floor trim from floor trim fixing clips.
16. Remove partially the bottom side of rear side finisher, and the pull out floor carpet to remove

INSTALLATION
Install in the reverse order of removal.