Clutch Slave Cylinder: Service and Repair

Clutch Actuator Cylinder Replacement

Removal Procedure

1. Remove the transmission. Refer to Transmission Replacement (Transmission Replacement).




2. Remove the 2 clutch actuator cylinder bolts (3).
3. Remove the clutch actuator cylinder (1) from the input shaft bearing retainer (2).

Installation Procedure




1. Position the clutch actuator cylinder (1) to the input shaft bearing retainer (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 2 clutch actuator cylinder bolts (3).

Tighten the clutch actuator cylinder bolts to 8 Nm (71 lb in).

3. Install the transmission. Refer to Transmission Replacement (Transmission Replacement).