Power Brake Booster Outlet Front Pipe Replacement

Power Brake Booster Outlet Front Pipe Replacement

Special Tools

CH-47830 Holding Fixture


Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution (Brake Fluid Irritant Caution) .

1. Remove the brake master cylinder and power brake booster assembly. Refer to Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (LHD) (Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (LHD))Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (RHD) (Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (RHD)) .
2. Install the CH-47830 to the master cylinder assembly.
3. Position the CH-47830 with the master cylinder assembly in a vise.




4. Disconnect the power brake booster outlet pipe fittings (1).
5. Remove the power brake booster outlet pipe (2) from the hydraulic brake booster pump (3) and the master cylinder (4).



Installation Procedure


Notice: Refer to Fastener Notice (Fastener Notice) .





1. Install the brake pipe fittings (1) of the power brake booster outlet front pipe (2) to the hydraulic brake booster pump (3) and the brake master cylinder (4).

Tighten the brake pipe fittings to 15 N.m (11 lb ft).

2. Remove the CH-47830 from the master cylinder assembly.
3. Install the brake master cylinder and power brake booster assembly. Refer to Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (LHD) (Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (LHD))Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (RHD) (Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (RHD)) .