Symptoms - Object Detection

Symptoms - Object Detection

Important: The following steps must be completed before using the symptoms tables.



1. Perform the Diagnostic System Check - Vehicle (Diagnostic System Check - Vehicle) before using the Symptom Tables in order to verify that all of the following are true:

* There are no DTCs set.
* The control modules can communicate via the serial data link.

2. Review the system operation in order to familiarize yourself with the system functions. Refer to Object Detection Description and Operation (Rear Vision Camera) (Object Detection Description and Operation (Rear Vision Camera))Object Detection Description and Operation (Front Vision Camera) (Object Detection Description and Operation (Front Vision Camera)) .



Visual/Physical Inspection

* Inspect for aftermarket devices which could affect the operation of the system. Refer to Checking Aftermarket Accessories (Component Tests and General Diagnostics) .
* Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
* Make sure the rear parking assist sensors located on the vehicle rear bumper are clear. Remove any snow, mud or ice that is blocking the sensors.



Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections (Component Tests and General Diagnostics) .


Symptom List

* Front Vision Camera System Malfunction (Front Vision Camera System Malfunction)
* Rear Vision Camera System Malfunction (Rear Vision Camera System Malfunction)