Windshield Washer Reservoir: Service and Repair

Washer Reservoir Replacement

1. Remove the right front inner fender.

- 2-door Front Inner Fender Replacement (2-Door)
- 4-door Front Inner Fender Replacement (4-Door)

2. Disconnect the 2P connector(s) (A) from the windshield washer motor (B) and the washer fluid level switch*.






4-door





2-door





3. Disconnect the windshield washer tube (C), then if necessary, remove the windshield washer motor and the washer fluid level switch*.

4. Remove the bolts (A) and the clip (B), then remove the washer reservoir.









5. Install the washer reservoir in the reverse order of removal.