Intermediate Shaft Removal

Intermediate Shaft Removal

6-speed M/T Model (Si)

1. Drain the transmission fluid, then reinstall the drain plug with a new sealing washer MTF Inspection And Replacement (6MT).

2. Remove the right driveshaft Driveshaft Removal.

3. Remove the three heat shield bolts, then remove the heat shield (A).






4. Remove the flange bolt (A) and the two dowel bolts (B).






5. Remove the intermediate shaft (A) from the differential. Hold the intermediate shaft horizontal until it is clear of the differential to prevent damaging the oil seal (B).