Front Crankshaft Seal: Service and Repair

Cam Chain Case Oil Seal Installation

Special Tools Required

- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 52 x 55 mm 07746-0010400

1. Clean and dry the chain case oil seal housing.

2. Apply light coat of new engine oil to the lip of the chain case oil seal.

3. Use the driver handle 15 x 135L and the attachment, 52 x 55 mm to drive a new oil seal (A) squarely into the chain case to the specified installed height.






4. Measure the distance between the chain case surface (A) and the oil seal (B).