Sunroof / Moonroof: Adjustments

Moonroof Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0+1/-1 mm (0+0.04/-0.04 in) all the way around, and the distance from glass edge to the roof panel edge should be 13.5+1/-1 mm (0.55+0.04/-0.04 in). If not, make the following adjustment:





1. Remove the bracket cover.

2. Adjust the glass (A).

1. Slightly loosen the TORX bolts with a TORX T25 bit.

2. Move the glass up or down and forward or rearward.

3. Tighten all TORX bolts securely.





3. If necessary, repeat on the opposite side.

4. Reset the moonroof control unit.