Drink Holders: Service and Repair

Rear Seat Armrest Beverage Holder Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

For Some Models - 4-door

NOTE:

- Take care not to tear or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Push on the bottom ribs (A) of the rear hooks (B) with the appropriate trim tool to pull the armrest beverage holder (C), then release the hooks from the wire (D).






2. Release the front hooks (A) from the wire (B), then remove the armrest beverage holder (C).





3. Install the beverage holder in the reverse order of removal. Make sure the front hooks are installed securely to the wire, then push down on the beverage holder and install the rear hooks into the wire securely.