Rear License Trim Replacement (4-Door)

Rear License Trim Replacement

4-door

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the trunk lid.

1. For some models: Remove the trunk lid trim Interior Trim Removal/Installation - Trunk Lid (4-Door).

2. Remove the bolt securing the trunk lid lock cylinder. Detach the clips by pushing them through the holes in the trunk lid (A) from the inside, then remove the rear license trim (B).





3. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.