Coolant Line/Hose: Service and Repair

Cooling System Connecting Pipe Replacement

1. Drain the engine coolant. Service and Repair

2. Remove the intake manifold. Service and Repair

3. Disconnect the heater hose (A) and the water bypass hose (B), then remove the connecting pipe mounting bolts (C), then remove the connecting pipe (D).

4. Install the connecting pipe with new O-ring (E), then connect the heater hose and the water bypass hose.

5. Install the intake manifold. Service and Repair

6. Refill the radiator with engine coolant, and bleed the air from the cooling system. Service and Repair

7. Clean up any spilled engine coolant.