Water Pump Replacement

Water Pump Replacement

1. Remove the drive belt. Service and Repair

2. Drain the engine coolant. Service and Repair

3. Remove the drive belt auto-tensioner pulley. Drive Belt Auto-Tensioner Pulley Replacement

4. Remove the crankshaft pulley. Service and Repair

5. Remove the oil cooler joint pipe (A), then remove the seven bolts securing the water pump. Remove the water pump (B).

6. Inspect, and clean the O-ring groove and mating surface of the water passage.

7. Install the water pump with a new O-rings (C) and the oil cooler joint pipe.

8. Clean up any spilled engine coolant.

9. Install the crankshaft pulley. Service and Repair

10. Install the drive belt auto-tensioner pulley. Drive Belt Auto-Tensioner Pulley Replacement

11. Install the drive belt. Service and Repair

12. Refill the radiator with engine coolant, and bleed the air from the cooling system. Service and Repair