Rear Seat Cushion Cover Replacement

Rear Seat Cushion Cover Replacement

2-door

NOTE:

- Put on gloves to protect your hands.

- Take care not to tear or damage the seat covers.

1. Remove the seat cushion. Rear Seat Removal/Installation

2. From the back of the seat-back, release the upholstery rings (A), then remove the insulator (B).






3. Release all the upholstery rings (A) in the seat cushion cover. Pull out the cushion cover straps (B) through the holes in the seat cushion pad.






4. Pull back the edge of the seat cushion cover (A) all the way around, and release the upholstery rings (B), then remove cover.






5. Install the cushion cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing the seat cushion cover, make sure the material is stretched evenly over the pad before securing the upholstery rings.

- Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).