Moonroof Drain Channel Replacement

Moonroof Drain Channel Replacement

1. Remove the moonroof glass. Service and Repair

2. On the both sides, slide the glass bracket (A) with the moonroof switch to the position where the moonroof normally tilts up and disconnect the drain channel rods (B).






3. Slide the drain channel (A) forward.






4. Pull up the rear edge of the drain channel (A) while pushing both clips (B), and release the channel from both hooks (C) of the drain channel slider by pulling it rearward.

5. Remove the drain channel.

6. Install the drain channel in the reverse order of removal, and note these items:
- Push the clips and the hooks into place securely.

- Check the glass position adjustment. Adjustments

7. Check for water leaks. Adjustments Let the water run freely from a hose without a nozzle. Do not use a high-pressure spray.