Glove Compartment: Service and Repair

Glove Box Removal/Installation

SRS components are located in this area. Review the SRS component locations, 2-door, SRS Component Location Index (2-Door) 4-door SRS Component Location Index (4-Door) and the precautions and procedures Service and Repair before doing repairs or service.

NOTE: Take care not to scratch the dashboard or the related parts.

1. Remove the bolts.






2. While holding the glove box (A), release the glove box stops (B) on each side of the dashboard by pushing them in, then remove the glove box.

3. Install the glove box in the reverse order of removal.