Emblem/Sticker Replacement (2-Door)

Emblem/Sticker Replacement

2-door

NOTE: When removing the emblems/stickers, take care not to scratch the body.

1. To remove the front "H" emblem or the front "Si" emblem, remove the front grille:
- '09-10 models Front Grille Replacement (2-Door)

2. Clean the body surface with a shop towel dampened in isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.

3. Apply the emblems/stickers where shown:
- When installing the LEV sticker on the inside surface of the left quarter glass, align the sticker with the edge of the glass mark and black ceramic as shown, then press the sticker into place, and remove the application tape.

- When installing the side i-VTEC sticker on the body, align notches in the application tape with the edge of the body and door opening, then press the sticker into place, and remove the application tape.

4. After installing the front "H" emblem, or the front "Si" emblem, reinstall the front grille:

- '09-10 models Front Grille Replacement (2-Door)