Wiper Arm/Washer Nozzle Adjustment (2-Door)

Wiper Arm/Washer Nozzle Adjustment

2-door

Wiper arms stop position

1. When the wiper arms stop at automatic stop position, confirm the wiper arms are at the standard position.
a: Position at about 1.1 in. (29 mm) [0.9 in. (23 mm)] from the top of cowl cover (A)

b: Position at about 4.1 in. (106 mm) [4.2 in. (107 mm)] from the top of cowl cover (A)





Washer nozzle position

2. When you jet the washer fluid, confirm 50 % or more of the jet fluid splashes down within the slash area. If there are not standard positions, adjust the nozzles.
c: Position at about 11.8 in. (302 mm) from the top of black ceramic (B) at lower windshield

d: Position at about 11.8 in. (302 mm) from the top of black ceramic (B) at lower windshield

e: Position at about 9.8 in. (250 mm) from the windshield center line (C)