Trunk Lid Lock Cylinder Replacement (2-Door)

Trunk Lid Lock Cylinder Replacement

2-door

1. Disconnect the cylinder rod (A), and if equipped, disconnect the cylinder switch connector (B).
NOTE: If the rod fastener (C) is damaged or stress-whitened, replace it with a new one.






2. Remove the bolt securing the lock cylinder (A). Then turn the trunk lid lock cylinder clockwise, and remove it.

3. Install the lock cylinder in the reverse order of removal, and note these items:
- Replace the rod fastener if it is damaged.

- Make sure the cylinder switch connector is plugged in properly (if equipped) and the cylinder rod is connected properly.

- Make sure the trunk lid opens properly and locks securely.