B1002

DTC Troubleshooting: B1002

DTC B1002: MICU (EEPROM) Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A. Troubleshooting - B-CAN System Diagnosis Test Mode A

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Wait for 6 seconds or more.

4. Check for DTCs with the HDS.

Is DTC B1002 indicated?
YES - Faulty MICU; replace the under-dash fuse/relay box. Under-Dash Fuse/Relay Box Removal and Installation

NO - Intermittent failure, the MICU is OK at this time. Check for loose or poor connections. If the connections are good, check the battery condition Testing and Inspection and the charging system.