Voice Guidance Cannot Be Heard, Is Broken Up, or There Is Static
Voice guidance cannot be heard, is broken up, or there is staticNOTE:
- Make sure that the correct DVD color and version are installed.
- Check any official Honda service website for more service information about the navigation system.
- Check that the volume setting and voice feedback are turned ON.
- Check the connectors for poor connection or loose terminals.
- Before troubleshooting, make sure you have the navigation system 4-digit anti-theft code, then write down the audio presets.
- After troubleshooting, enter the navigation system anti-theft code, then enter the audio presets.
1. Press the display unit SET-UP button.
2. Check the volume setting for the navigation system.
Is it set to OFF?
YES - Set the volume to an audible level.
NO - Go to step 3.
3. Check the radio operation.
Can you hear the radio?
YES - Go to step 4.
NO - Troubleshoot the audio system.
4. Go into the Diagnostic Menu and use the Navi System Link test to check the radio.
Is the Radio icon red?
YES - Troubleshoot the audio system.
NO - Go to step 5.
5. Test the voice control switch.
Is voice control switch OK?
YES - Replace the navigation unit.
NO - Replace the voice control switch.