DTC 37-xx
DTC 31-xx*: ABS Right-front Inlet Solenoid Valve MalfunctionDTC 32-xx*: ABS Right-front Outlet Solenoid Valve Malfunction
DTC 33-xx*: ABS Left-front Inlet Solenoid Valve Malfunction
DTC 34-xx*: ABS Left-front Outlet Solenoid Valve Malfunction
DTC 35-xx*: ABS Right-rear Inlet Solenoid Valve Malfunction
DTC 36-xx*: ABS Right-rear Outlet Solenoid Valve Malfunction
DTC 37-xx*: ABS Left-rear Inlet Solenoid Valve Malfunction
DTC 38-xx*: ABS Left-rear Outlet Solenoid Valve Malfunction
*: Subcode.
1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Check for DTCs with the HDS.
Is DTC 31-xx, 32-xx, 33-xx, 34-xx, 35-xx, 36-xx, 37-xx, or 38-xx indicated?
YES - Check for loose terminals in the ABS modulator-control unit 25P connector. If necessary, substitute a known-good ABS modulator-control unit and retest.
NO - Intermittent failure, the system is OK at this time. Check for loose terminals at the ABS modulator-control unit 25P connector. Refer to intermittent failures troubleshooting. Intermittent Failures