DTC 14-23

DTC 12-23: Right-front Wheel Sensor Installation Error (0 to 9 mph (0 to 15 km/h))
DTC 14-23: Left-front Wheel Sensor Installation Error (0 to 9 mph (0 to 15 km/h))
DTC 16-23: Right-rear Wheel Sensor Installation Error (0 to 9 mph (0 to 15 km/h))
DTC 18-23: Left-rear Wheel Sensor Installation Error (0 to 9 mph (0 to 15 km/h))
1. Test-drive the vehicle. Drive the vehicle between 1 mph (1 km/h) and 9 mph (15 km/h).
2. Check the RF, LF, RR, LR WHEEL SPD in the ABS DATA LIST with the HDS.
Are all four the same indicated value?
YES - Intermittent failure, the system is OK at this time. Check for loose terminals between the wheel sensor 2P connector and the ABS modulator-control unit 25P connector. Refer to intermittent failures troubleshooting. Intermittent Failures
NO - Go to step 3.
3. Turn the ignition switch OFF.





4. Check the appropriate wheel sensor is properly mounted.
Is the wheel sensor installation OK?
YES - Replace the appropriate wheel sensor.
NO - Reinstall the wheel sensor, and check the mounting position.