DTC 68

DTC 68: EPS Control Unit internal Circuit
1. Clear the DTC.
2. Start the engine.
3. Turn the steering wheel from lock-to-lock several times, and wait 10 seconds or more.
Does the EPS indicator come on?
YES-Go to step 4.
NO-Check for loose wires or poor connections. If the connections are good, the system is OK at this timed
4. Stop the engine, and verify the DTC.
Is DTC 66 or 68 indicated?
YES-Check for loose or poor connections at the EPS control unit. If the connections are good substitute a known-good EPS control unit. If the symptom/indication goes away, replace the original EPS control unit and recheck.
NO-Perform the appropriate troubleshooting for the code indicated.