DTC 67

DTC 67: Torque Sensor I/F Circuit
1. Clear the DTC.
2. Start the engine.
3. Turn the steering wheel from lock-to-lock several times, and wait 10 seconds or more.
Does the EPS indicator come on?
YES-Go to step 4.
NO-The system is OK at this time.
4. Stop the engine, and verify the DTC.
Is DTC 67 indicated?
YES-Check for loose or poor connections at the EPS control unit. If the connections are goody substitute a known-good EPS control unit. If the symptom/indication goes away, replace the original EPS control unit and rechecks
NO-Perform the appropriate troubleshooting for the code indicated.