Rear Bumper Cover - 4-Door

Rear Bumper Cover - 4-Door

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. WARNING: Before beginning any service procedure. Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions. Health and Safety Precautions

2. With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview. Service and Repair

3. NOTE: On both sides
Position aside the rear wheel splash shield.
Torque: 2 Nm







4. NOTE: On both sides
Torque: 2 Nm







5. If equipped.







6. Remove the rear lamp assemblies
Refer to: Rear Lamp Assembly - 4-Door.

7. Torque: 3 Nm







Installation
1. To install, reverse the removal procedure.