Removal and Replacement

Front Bumper Cover

Removal

NOTE:
- Removal steps in this procedure may contain installation details.
- The base model front bumper cover is shown, the ST model front bumper cover is similar.

1. WARNING: Before beginning any service procedure. Failure to follow instruction may result in serious personal injury.

Refer to: Health and Safety Precautions. Health and Safety Precautions

2. With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview. Service and Repair

3. On both sides.
Torque: 3 Nm

6. Remove the headlamp assemblies.
Refer to: Headlamp Assembly.
7.

8. Torque: 4 Nm

9. Separate the lower radiator air deflectors from the front bumper cover.

Installation
1. To install, reverse the removal procedure.