Air Bag Systems/Seat Belt Systems

Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS)

DTC Charts

The DTCs can be retrieved from the RCM (Restraints Control Module) and the OCSM (Occupant Classification System Module) with a scan tool via the DLC (Data Link Connector).

Restraints Control Module (RCM) DTC Chart

NOTE: Always make sure the correct Supplemental Restraint System (SRS) component is being installed. Parts released for other vehicles may not be compatible even if they appear physically similar. Check the part number listed in the Ford Catalog Advantage(TM) or equivalent to make sure the correct component is being installed. If an incorrect SRS (Supplemental Restraint System) component is installed, DTCs may set.

NOTE: This module utilizes a 5-character DTC followed by a 2-character failure type code. The failure type code provides information about specific fault conditions such as opens or shorts to ground. Continuous Memory Diagnostic Trouble Codes (CMDTCs) have an additional 2-character DTC status code suffix to assist in determining DTC history.





































a DTC: Retrieved using scan tool.

Occupant Classification System Module (OCSM) DTC Chart - Weight Sensor Bolt System

NOTE: This module utilizes a 5-character DTC followed by a 2-character failure type code. The failure type code provides information about specific fault conditions such as opens or shorts to ground. Continuous Memory Diagnostic Trouble Codes (CMDTCs) have an additional 2-character DTC status code suffix to assist in determining DTC history.













a DTC: Retrieved using scan tool.

Occupant Classification System Module (OCSM) DTC Chart - Bladder System

NOTE: The Occupant Classification System Module (OCSM) retrieves and reports DTCs using on-demand and CMDTCs (Continuous Memory Diagnostic Trouble Codes) DTCs and fault PIDs.





a DTC: Retrieved using scan tool.

b DTC has associated bit-mapped PIDs.