Diagnostic Routine AM

Diagnostic Routine AM

Diagnostic Overview

The Headlamps On Warning Chime Is Inoperative

Normal Operation and Fault Conditions

REFER to Headlamps On Warning Chime .

Pinpoint Test

1. CHECK THE SAFETY BELT WARNING CHIME OPERATION

1. Ignition OFF.

2. Ignition ON.

3. Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN for 6 seconds.

Does the safety belt warning chime operate for approximately 6 seconds?







2. CHECK THE INTERIOR LAMPS OPERATION

1. Open and close the driver door.

2. Observe the interior lamps.

Do the interior lamps operate correctly from the driver door?







3. RETRIEVE THE RECORDED DTCs (Diagnostic Trouble Codes) FROM THE IPC (Instrument Panel Cluster) SELF-TEST

1. Using a scan tool, perform the IPC (Instrument Panel Cluster) self-test.

Are any DTCs (Diagnostic Trouble Codes) recorded?







4. RETRIEVE THE RECORDED DTCs (Diagnostic Trouble Codes) FROM THE BCM (Body Control Module) SELF-TEST

1. Using a scan tool, perform the BCM (Body Control Module) self-test.

Are any DTCs (Diagnostic Trouble Codes) recorded?