Wiper Motor - Rear Window

Wiper Motor - Rear Window

Removal and Installation

1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear Wiper Pivot Arm - Rear.

2. Remove the lower liftgate trim panel. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

3. Remove the 3 rear wiper motor bolts.
- To install, tighten to 9 Nm (80 lb-in).

- Disconnect the electrical connector.





4. Remove the rear wiper motor.

5. To install, reverse the removal procedure.