Shifter M/T: Service and Repair

Gearshift Lever









Removal

1. Remove the floor console. For additional information, refer to Instrument Panel and Console Service and Repair.

2. Remove the gearshift cables.





3. Remove the 4 gearshift lever nuts and remove the gearshift lever.





Installation

1. Install the gearshift lever and the 4 gearshift lever nuts.
- Tighten to 9 Nm (80 lb-in).





2. Install the gearshift cables.





3. Install the floor console. For additional information, refer to Instrument Panel and Console Service and Repair.

4. Adjust the gearshift mechanism. For additional information, refer to Manual Transaxle/Transmission and Clutch - General Information Adjustments.