Rear Shelf: Service and Repair

Parcel Shelf - 4-Door Sedan









Removal and Installation

1. Remove the rear seat cushion.

2. Remove the 3 safety belt anchor bolts.
- To install, tighten to 48 Nm (35 lb-ft).


3. Remove the RH and LH parcel shelf upper trim panels.
- Gently pull the parcel shelf upper trim panel toward the center of the vehicle to release the 4 parcel shelf upper trim panel retaining clips.

- Pull the RH and LH safety belts through the parcel shelf upper trim panel openings.

- Remove the parcel shelf upper trim panel.


4. Remove the RH and LH C-pillar trim panels. For additional information, refer to C-Pillar Trim Panel- 4-Door Sedan C-Pillar Trim Panel - 4-Door Sedan.

5. Remove the safety belt retractor bezel.
- Pull the safety belt retractor bezel toward the front of the vehicle.

- Remove the safety belt retractor bezel from the safety belt.


6. Remove the 4 parcel shelf pin-type retainers.

7. Remove the parcel shelf.
- Pull the parcel shelf toward the front of the vehicle.

- Pull the center safety belt rearward through the center retractor opening.


8. NOTICE: To avoid damage to the parcel shelf upper trim panel, remove any retaining clips from the body and attach them to the parcel shelf upper trim panel before installing.

To install, reverse the removal procedure.
- To install, align the trim panel retaining clips to the retaining clip holes in the body.