Roof Opening Panel Shield

Roof Opening Panel Shield

Removal and Installation

1. Remove the roof opening panel glass. For additional information, refer to Roof Opening Panel Glass Roof Opening Panel Glass.

2. Remove the trough assembly. For additional information, refer to Trough Assembly Trough Assembly.

3. Slide the roof opening panel shield forward halfway.

4. Disengage the roof opening panel shield guide feet.
- Lift the front portion of the roof opening panel shield upward at the center until the front guide feet disengage and then proceed towards the rear until all the guide feet are disengaged and the roof opening panel shield is removed from the vehicle.





5. To install, reverse the removal procedure.