Seat Position Sensor: Service and Repair

Seat Position Sensor

NOTE: Driver seat shown, passenger seat similar (if equipped).











1. Remove the affected front seat. For additional information, refer to the Removal and Installation portion of Seats.

2. Disconnect the seat position sensor electrical connector.

3. WARNING: Always tighten the seat position sensor retaining bolt to specified torque. Failure to do so may result in incorrect restraint system operation, which increases the risk of personal injury or death in a crash.

Remove the bolt and seat position sensor.
- To install, tighten to 6 Nm (53 lb-in).

4. To install, reverse the removal procedure.

5. Install the front seat. For additional information, refer to the Removal and Installation portion of Seats.